Due to their combination of electrical and flame hazards, electrical fires pose a serious threat. To protect yourself and those around you, it is essential to learn how to safely put out an electrical fire. We will guide you step by step on how to extinguish a fire safely while minimising risks in this article. Visit our website and learn more about What is the best fire extinguisher for electrical fires.
1. Assessment of the Situation
Be sure to assess the situation before taking action to see if you can safely extinguish an electrical fire. You should consider the following aspects:
Fire size and intensity.
You should have a good understanding of the electrical system and its equipment.
Fire extinguishing devices should be readily available.
2. Remove the electricity:
First and foremost, you must cut the electricity source. The power source must be cut off to prevent any further electrical arcing or electrical shock. You can follow the steps below:
Switch off equipment. If you suspect that the cause of the fire may be a particular piece of electrical equipment such as a microwave or toaster, turn off or unplug the device at its power source.
Circuit breaker, fuse box or both: If you can’t identify the cause of the fire or if it is extensive, turn off electricity to the area by using the fuse box or the circuit breakers. Only do this if there is no risk of an electrical shock and you are able to safely perform the task.
3. Use the right extinguisher
The right extinguisher for the job is essential. Use a fire extinguisher of Class C for electrical fires. The Class C fire extinguisher contains non-conductive agents which are designed to suppress electric fires while not conducting electricity.
4. The base of the flame is the best place to aim:
Use a fire extinguisher of Class C and aim at the base, not directly at the flames. The fire is effectively put out by cutting off its oxygen source. While using the extinguisher, keep a distance that is safe.
5. Use short bursts
Do not spray continuously, but instead squeeze the handle. It conserves extinguishing liquid and makes sure you have enough for the entire fire.
6. Back Away Safely:
Even if you have used the fire extinguisher to put out the flames, move away slowly. Keep a safe space and keep an eye on the area. Electrical fires are prone to re-igniting.
7. For Professional Assistance:
Call the fire department regardless of whether or not you are able to extinguish the flames. A professional firefighter can do a thorough inspection, check for hidden fires, as well as address potential safety issues.
More Safety Tips
Avoid using water. Water is a conductor of electricity, and it should not be used as a means to extinguish flammable electrical devices. It can result in electric shocks or fire spread.
When dealing with electric fires, use protective gear.
If necessary, you should evacuate. Closing doors will help contain a fire to the extent possible. You can also call in professional assistance.
Maintenance: Inspect and maintain your electrical wiring and equipment regularly to avoid electrical problems and reduce fire risks.
Fire safety is dependent on knowing how to safely put out an electrical fire. Following these steps, and using appropriate precautions will help you effectively extinguish an electrical fire and minimize risks for yourself and others. Safety is always the first priority. If necessary, seek out expert help to guarantee a safe result.